Quantcast
Channel: VMware Communities: Message List
Viewing all 230224 articles
Browse latest View live

EXSI 5.5 shutdown by itself

$
0
0

Hi Guys,

 

i need some help to check why my company ESXI 5.5 server which was built last dec 2013 suddenly shutdown by itself.

following is my finds from the events

 

At least one coredump target has been configured. Host core dumps will be saved.

info 7/3/2014 10:37:53 AM  XXXXXESXI01.PXXXXXX.SG

 

I am able to extract the logs from the ESXI server from the vsphere client using the export system logs settings. i have upload the logs to my dropbox account

 

https://www.dropbox.com/sh/pmw6qq5bf9w02jl/AAAp8nNHfjIm6NquJN6sCS2Sa

 

From the vmksummary.log

2014-07-02T21:29:37Z bootstop: Host is powering off

2014-07-03T01:56:33Z bootstop: Host has booted

 

which told me it shutdown on 2014-07-02T21:37Z

 

on the ESXI 5.5 server log, i found the following. Seem like something trigger a shutdown. Any one can advise me what causes the shutdown?

 

2014-07-02T21:29:37.018Z [498C2B70 info 'Hostsvc.HaHost'] Recvd. ACPI power event from the vmkernel

2014-07-02T21:29:37.018Z [49840B70 verbose 'Vimsvc.ha-license-manager' opID=hostd-96f3] Load: Loading existing file: /etc/vmware/license.cfg

2014-07-02T21:29:37.029Z [49840B70 verbose 'Default' opID=hostd-96f3] ha-license-manager:Validate -> Valid license detected for "VMware ESX Server 5.0" (lastError=0, desc.IsValid:Yes)

2014-07-02T21:29:37.036Z [49840B70 info 'Solo.Vmomi' opID=hostd-96f3] Activation [N5Vmomi10ActivationE:0x49b90f38] : Invoke done [shutdown] on [vim.HostSystem:ha-host]

2014-07-02T21:29:37.036Z [49840B70 verbose 'Solo.Vmomi' opID=hostd-96f3] Arg force:

--> true

2014-07-02T21:29:37.036Z [49840B70 info 'Solo.Vmomi' opID=hostd-96f3] Throw vim.fault.NotAuthenticated

2014-07-02T21:29:37.036Z [49840B70 info 'Solo.Vmomi' opID=hostd-96f3] Result:

--> (vim.fault.NotAuthenticated) {

-->    dynamicType = <unset>,

-->    faultCause = (vmodl.MethodFault) null,

-->    object = 'vim.HostSystem:ha-host',

-->    privilegeId = "Host.Config.Maintenance",

-->    msg = "",

--> }

2014-07-02T21:29:37.037Z [498C2B70 error 'Hostsvc.HaHost'] Unknown exception during shutdown

2014-07-02T21:29:37.039Z [498C2B70 info 'SysCommandPosix'] ForkExec(/sbin/poweroff)  57210481

2014-07-02T21:29:37.053Z [4AFC1B70 info 'Hostsvc.VmkVprobSource'] VmkVprobSource::Post event: (vim.event.EventEx) {

-->    dynamicType = <unset>,

-->    key = 2,

-->    chainId = 144,

-->    createdTime = "1970-01-01T00:00:00Z",

-->    userName = "",

-->    datacenter = (vim.event.DatacenterEventArgument) null,

-->    computeResource = (vim.event.ComputeResourceEventArgument) null,

-->    host = (vim.event.HostEventArgument) {

-->       dynamicType = <unset>,

-->       name = "PPSGESXI01.PRINCETON.SG",

-->       host = 'vim.HostSystem:ha-host',

-->    },

-->    vm = (vim.event.VmEventArgument) null,

-->    ds = (vim.event.DatastoreEventArgument) null,

-->    net = (vim.event.NetworkEventArgument) null,

-->    dvs = (vim.event.DvsEventArgument) null,

-->    fullFormattedMessage = <unset>,

-->    changeTag = <unset>,

-->    eventTypeId = "esx.audit.host.stop.shutdown",

-->    severity = <unset>,

-->    message = <unset>,

-->    objectId = "ha-eventmgr",

-->    objectType = "vim.HostSystem",

-->    objectName = <unset>,

-->    fault = (vmodl.MethodFault) null,

--> }

2014-07-02T21:29:37.053Z [4AFC1B70 info 'Vimsvc.ha-eventmgr'] Event 18796 : Host is shutting down.

2014-07-02T21:29:37.535Z [4AFC1B70 verbose 'Vimsvc.Ticket 52 9e aa 7b 02 0b 73 1d-e9 48 ef a5 02 01 18 94' opID=hostd-787a] Ticket issued for root

2014-07-02T21:29:37.538Z [4AFC1B70 verbose 'Vimsvc.Ticket 52 9e aa 7b 02 0b 73 1d-e9 48 ef a5 02 01 18 94' opID=hostd-8295] Ticket used

Accepted password for user root from 127.0.0.1

2014-07-02T21:29:37.538Z [4AFC1B70 info 'Vimsvc.ha-eventmgr' opID=hostd-8295] Event 18797 : User root@127.0.0.1 logged in as VMware-client/5.1.0

2014-07-02T21:29:37.540Z [498C2B70 info 'Vimsvc.TaskManager' opID=hostd-8c2d user=root] Task Created : haTask-ha-host-vim.host.AutoStartManager.autoPowerOff-325407764

2014-07-02T21:29:37.540Z [4AFC1B70 info 'Vimsvc.TaskManager' opID=hostd-8c2d user=root] Task Completed : haTask-ha-host-vim.host.AutoStartManager.autoPowerOff-325407764 Status success

2014-07-02T21:29:37.544Z [4AAC1B70 verbose 'Default' opID=hostd-9e48 user=root] CloseSession called for session id=27756b92-4e3e-1a76-4789-90e1b907064b

2014-07-02T21:29:37.545Z [4AAC1B70 info 'Vimsvc.ha-eventmgr' opID=hostd-9e48 user=root] Event 18798 : User root@127.0.0.1 logged out (login time: Friday, 17 July, 1970 17:55:16, number of API invocations: 0, user agent: VMware-client/5.1.0)

2014-07-02T21:29:37.545Z [4AAC1B70 verbose 'SoapAdapter'] Responded to service state request

2014-07-02T21:29:39.595Z [4AAC1B70 verbose 'Default' opID=hostd-e71e user=root] CloseSession called for session id=04d10a99-b197-db3e-5ea4-b4a998d68c1c

2014-07-02T21:29:39.595Z [4AAC1B70 info 'Solo.Vmomi' opID=hostd-e2da user=root] Activation [N5Vmomi10ActivationE:0x4991cc18] : Invoke done [waitForUpdates] on [vmodl.query.PropertyCollector:ha-property-collector]

2014-07-02T21:29:39.595Z [4AAC1B70 verbose 'Solo.Vmomi' opID=hostd-e2da user=root] Arg version:

--> "116843"

2014-07-02T21:29:39.595Z [4AAC1B70 info 'Solo.Vmomi' opID=hostd-e2da user=root] Throw vmodl.fault.RequestCanceled

2014-07-02T21:29:39.595Z [4AAC1B70 info 'Solo.Vmomi' opID=hostd-e2da user=root] Result:

--> (vmodl.fault.RequestCanceled) {

-->    dynamicType = <unset>,

-->    faultCause = (vmodl.MethodFault) null,

-->    msg = "",

--> }

2014-07-02T21:29:39.596Z [4AAC1B70 info 'Vimsvc.ha-eventmgr' opID=hostd-e71e user=root] Event 18799 : User root@127.0.0.1 logged out (login time: Wednesday, 08 July, 1970 02:32:53, number of API invocations: 0, user agent: )

2014-07-02T21:29:40.024Z [4AAC1B70 verbose 'Statssvc.vim.PerformanceManager'] HostCtl Exception in stats collection: Sysinfo error on operation returned status : Not initialized. Please see the VMkernel log for detailed error information

2014-07-02T21:29:40.024Z [4AAC1B70 verbose 'Statssvc.vim.PerformanceManager'] HostCtl Exception in stats collection.  Turn on 'trivia' log for details

2014-07-02T21:29:41.018Z [4AFC1B70 info 'Hostsvc.HaHost'] Recvd. ACPI power event from the vmkernel

2014-07-02T21:29:41.018Z [498C2B70 info 'Solo.Vmomi' opID=hostd-a085] Activation [N5Vmomi10ActivationE:0x4ae46ce8] : Invoke done [shutdown] on [vim.HostSystem:ha-host]

2014-07-02T21:29:41.019Z [498C2B70 verbose 'Solo.Vmomi' opID=hostd-a085] Arg force:

--> true

2014-07-02T21:29:41.019Z [498C2B70 info 'Solo.Vmomi' opID=hostd-a085] Throw vim.fault.NotAuthenticated

2014-07-02T21:29:41.019Z [498C2B70 info 'Solo.Vmomi' opID=hostd-a085] Result:

--> (vim.fault.NotAuthenticated) {

-->    dynamicType = <unset>,

-->    faultCause = (vmodl.MethodFault) null,

-->    object = 'vim.HostSystem:ha-host',

-->    privilegeId = "Host.Config.Maintenance",

-->    msg = "",

--> }

2014-07-02T21:29:41.019Z [4AFC1B70 error 'Hostsvc.HaHost'] Unknown exception during shutdown

2014-07-02T21:29:41.020Z [4AFC1B70 info 'SysCommandPosix'] ForkExec(/sbin/poweroff)  57210666

Section for VMware ESX, pid=33967, version=5.5.0, build=1331820, option=Release

 

 

Appreciates your assistance and advise.

 

Regards,

Roy Chan


Re: VDI. Не создаються новые машинки в пуле.

$
0
0

Я с Horizon и vCenter с самоподписанными сертификатами не работал, но когда читал документацию понял что этого "verify" достаточно, возможно варнинг и должен остаться, но точно не скажу. Я бы больше внимания уделил 2й проблеме, проверьте поля которые я указал.

update: по поводу первой проблемы, здесь VMware Documentation Libraryчетко написано

erify that an SSL server certificate is installed on the vCenter Server host. In a production environment, install a valid SSL certificate that is signed by a trusted Certificate Authority (CA).

In a testing environment, you can use the default certificate that is installed with vCenter Server, but you must accept the certificate thumbprint when you add vCenter Server to View.

Т.е. достаточно жмякнуть ОК и View Manager будет лояльно относиться к самоподписанному сертификату vCenter, но как я сказал выше, думаю это не основная ваша проблема, вот вторая очевидно указывает на то, что имя в сертификате не соответствует доменному имени машины View CS. Не зря в WildCard сертификатах (да и в обычных тоже) указываются доменные имена машины View CS и др. компонентов. Вы так и не сказали меняли ли имя машины View CS.

Re: VDPA Data Protection Advanced license for DR site

Re: Guest display split into identical panes

$
0
0

OK. Thanks for the VM. I could reproduce the problem.

 

Here's what's happening: The VM is created on a very old version of player or workstation, and it's official virtualHW version is 7. This causes the X server driver dispatcher to enable the old legacy driver that is not at all compatible with vmware fbdev. Still Ubuntu has forced fbdev on for 12.04, and there is a clash. By coincidence it happens with this upgrade, but it could have happened much earlier.

 

Remedy: 1: Update the VMs view of the virtual hardware:

0. BE SURE TO BACKUP YOUR VM, BE IT USING SNAPSHOTS OR A COPY

1a, For Workstation 9 or above owners, just run "Upgrade this VM"

1b (Completely unsupported and unrecommended) For player players: Get a recent vmware player, Change the .vmx file line virtualHW.version = "7" to "9" and fire up the VM. Verify that everything seems to work before proceeding.

 

Remedy 2: Disable vmwgfx fbdev in ubuntu.

0. BE SURE TO BACKUP YOUR VM, BE IT USING SNAPSHOTS OR A COPY

1. Edit the VM file /etc/modprobe.d/vmwgfx-fbdev.conf to say

options vmwgfx enable_fbdev=0

2. Run

sudo update-initramfs -u

3. Reboot

 

Eventually we might release a patched xf86-video-vmware that enables the newer modesetting driver whenever fbdev thinks the hardware version is new enough...

 

Thanks,

Thomas

Destination Host Unreachable

$
0
0

Dear all

 

i am new to Vmware and linux, we are facing issue on linux vm can`t ping our server and also the cant ping the host getting error as Destination Host Unreachable,  Running Vspher Clietn v5.1.0, VMware ESXi 5.1.0 . other Vm running on the same host can reach other server and able to ping in and out, except the one server. your help will be much appreciated

Re: Destination Host Unreachable

$
0
0

Check if your VM are on the same subnet and VLAN of your host and that the uplinks ports of your host are tagged with VLAN of your VM.

 

Of course, if VM are on different subnet and VLAN, make sure setup the default gateway on that VM, and that your router knows both networks.

Mirrored desktop

$
0
0

I am deploying View to a client who requires dual monitors, mirrored.  I have it all setup but I cannot change the screens to mirrored - the desktop is 'extended'.  Anybody figured out how to do this?

 

Mark

Re: Destination Host Unreachable

$
0
0

Hi Richard

 

thanks for the update, Host and Vm are in the same subnet and Host in Vlan2 and VM in Vlan 3, so is there any other setting i need to do


Re: Target count for a storage adapter HBA ?

$
0
0

No there are two storage arrays & I guess that answers me..I feel so dumb now ...but thanks for pointing that out

Re: Destination Host Unreachable

$
0
0

Hi Rich

 

also i notice network setting on VM don`t have the bridget network connection, appears only the custom is it correct attached snapshot for your reference

 

vm network.png

Re: Fusion 6.0.2 graphic corruption with 3D enabled - mid-2010 Macbook Pro

$
0
0

Hello,

 

I have the same problem running Solidworks in WinXP on a Macbook Air late 2011.

Fusion5 was absolutely fine, now in 6.0.2 I have this annoying flickering, text missing, thin lines are not shown.

HELP!

Re: Destination Host Unreachable

$
0
0

If host and VM are on same subnet, they must be on the same VLAN, otherwise you will cannot ping each other.

LUbuntu 14.04, the installed Vmware Tools not applied

$
0
0

Hi Guys,

 

Have you experienced issues with vmware tools on LUbuntu 14.04 with Vmware Workstation 10? I've installed it properly, but it looks like it does not start. Could you please help what should I do after the install to start the tool?

 

Thank You!

 

Robert

Re: Target count for a storage adapter HBA ?

$
0
0

If you have two storage arrays with two storage processors on each storage array, then you will have 4 targets:

 

Target 1 - Storage array 1 - Storage Processor 1

Target 2 - Storage array 1 - Storage Processor 2

Target 3 - Storage array 2 - Storage Processor 1

Target 4 - Storage array 2 - Storage Processor 2

Re: ESXi5.5ホストのファイアウォールを起動時に無効にする方法について

$
0
0

こんばんは。

 

ためしに、無償版ライセンスを適用した ESXi 5.5 でも設定してみましたが、

同様にESXi ファイアウォールを無効にできました。

 

ちなみに、ここで無効化している ESXi Firewall は、

ESXi自身だけ(VMkernel ポートだけ)に作用します。

そのため、もしVM(ゲストOS)がうまく通信できないのであれば、

ESXiのファイアウォールよりも、

  • 仮想スイッチやポートグループの設定
  • VMの仮想ネットワークアダプタの設定(割り当てているポートグループが正しいか)
  • ゲストOS(WindowsやLinux)のネットワーク設定
  • ゲストOSのファイアウォール設定(Windowsファイアウォールやiptables)

のあたりを確認してみると良いと思いました。

 

以上です。ご参考まで・・・


Re: DMZ question

$
0
0

Hey VirtualRay,

 

Typically people accomplish DMZ's in a few ways.

 

1.)  They dedicate 2+ nics to all the port groups that you wish to be in the DMZ and then have those run to a switch/firewall to keep them isolated.  The firewall typically does most of the work here as you will setup access rules as to what ports are allowed in and out of the DMZ port groups.  All Vm's in these port groups will be able to talk to each other unless you want different DMZ silo's with different VLAN's / broadcast ranges.  IE.)  DMZ1 - 10.0.1.x /24 VLAN 100,  DMZ2 - 10.0.2.x /24 VLAN 200, then when stuff routes to the switch/routers you can control what can talk to what.

quick picture dmzsetup.PNG

 

 

2.)  They use Private VLAN's.  Private VLANs are really handly as they allow you to create a Primary Privat VLAN, then have secondary VLAN's inside of it.  The secondary VLAN's inside the primary are broken down into 2 different groups.  Community and Isolated.  Community can talk to the private VLAN and anythign else in its own community.  Isolated can only talk to anything inside the Isolated and the Private VLAN.  Your firewall will typically be sitting on the Private VLAN which will do the routing between the traffic. 
pvlan.PNG

So in this picture Community VLAN 123 can talk to anything inside VLAN 123 and the Primary VLAN 111, while Community VLAN 345 can talk to anything inside its community and Primary VLAN 111, however each community is unable to communicate with each other.  The isolated VLAN 222 can only talk to other systems in the Isolated vlan and of course the Primary VLAN 111 as thats its route out to the external world.

 

3.)  You can use a virtual router and or vShield to create a virtual Firewall on your DMZ port groups and control what can go in and out that way.

 

Most people opt for option 1 as option 2 requires some more advanced switch setup and your hardware switches need the abiltity to do PVLANS

 

I hope this has helped.

Workstation 10.0.2 Panic - logs attached

$
0
0

I was reviewing a vm workstation log from a couple of weeks ago and the log seemed to indicate hard errors. I collected support information and attached the relevant logs.

 

Can one of the engineers have a look and let me know if there is an issue?

 

Thank you.

 

edit: 7/4/14

 

Version 10.0.3 seems to have resolved these issues. Thank you VMWARE.

Error while powering on: internal error

Re: 評価版と無償版の違いについて

$
0
0

こんばんは。

 

ついでにお伝えすると、細かいところだと

無償版には下記のような制限もあります。


★仮想マシンバージョンを vmx-10にすると設定変更できなくなります。

仮想マシンのバージョンをESXi 5.5で最新のvmx-10にバージョンアップすると

vSphere Client でVMの設定編集ができなくなります。

vmx-10 のVMを設定編集するためには、有償版(のvCenter のWeb Client)か、

VMware Workstationからの接続(これも有償製品)が必要になります。

※ただし、デフォルトのv8(vmx-08)なら設定編集可能です。個人的には

 ただVMを動かすだけならvmx-08 のスペックでもそんなに困らない気はします。

ちなみに、こんな感じです↓

ESXi 5.5 は仮想マシンバージョン10(vmx-10)

 

★PowerCLI や、vMA等からのコマンドによる設定変更ができません。

リモートからのコマンド実行は、参照コマンドなら受け付けられますが、

設定変更やVMの起動停止をするようなコマンドが実行できません。

そのため、本番環境やVM数が多いテスト環境などで

自動設定、一括操作などをしたい場合は、有償版でないときついです。

※ただし、ESXiに直接DCUI/SSHログインしてコマンド実行するなら、特に制限はないようです。

 

以上です。ご参考まで。

Re: vmware Perfomance (пропали графики)

Viewing all 230224 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>